Live Capture: POOM to Wireshark
Stream POOM 802.15.4 captures into Wireshark with the current bridge, preserving channel, RSSI, LQI and timestamps while monitoring packet drops.
Updated in firmware 1.0.17. The live 802.15.4 path now preserves channel, RSSI, LQI and reception timestamps, with counters for packet loss and queue usage.
- Install Wireshark and the current POOM Wireshark Bridge on your host, following its installation guide.
- Connect POOM over USB and close any other application using the serial port.
- Open THE BEAST → SNIFFER RT → 802.15.4, choose your channel and leave capture running. Some firmware labels spell the entry SNNIFER RT.
- In the installed bridge environment, discover POOM, then start the capture using its device number.
python -m poom_ws search
python -m poom_ws ieee802154 --device 1
Replace 1 with the device number reported by discovery. The bridge sends TAP records to Wireshark and mirrors the capture to a PCAP file. On POOM, P is the packet count, D counts drops, and RSSI/LQI describe the latest frame.
Use a bridge version supporting COBS v2 for the new 802.15.4 metadata. Wireshark interprets Zigbee, Thread or MAC frames according to the payload; receiving a frame does not decrypt protected application traffic. BLE live capture is also supported by the bridge's separate BLE workflow.
Host setup and options: bridge documentation.